– High-performance, slip-resistant cementitious adhesive.
– Designed for large-format ceramic and porcelain tiles, natural stone, marble, and mosaics.
– For walls and floors, indoors and outdoors.
– Flexible up to 2 mm; maximum thickness 15 mm.
– Suitable for concrete, plaster, and cementitious waterproofing.
– Can also be applied on gypsum boards and tiles (with primer).
– Classification: C2TE (can be upgraded to C2TES2 with Cemlatex 600).
– Packaging: 25 kg
– Coverage: 5–6 m² maximum
– Temperature resistance: -30°C to +90°C
– Origin: Italy

Flexible cementitious grout with smooth texture.
Anti-bacterial, anti-fungal, resistant to mold and efflorescence.
For porcelain and ceramic tiles with joint widths (1–8 mm).
Ideal for bathrooms, showers, swimming pools, balconies, and commercial areas.
Suitable for indoor and outdoor use .
Must not be mixed with additives.
Available in 26 colors.
Packaging: 5 kg
Temperature resistance: -30°C to +90°C
Origin: Italy

Cementitious grout with rough texture and high flexibility.
Resistant to mold, abrasion, and harsh external conditions.
For porcelain and ceramic tiles with joint widths (3–30 mm).
Ideal for swimming pools, showers, heating rooms, industrial areas, workshops, courtyards, and terraces.
Suitable for indoor and outdoor use.
Available in 8 colors.
Packaging: 25 kg
Temperature resistance: -30°C to +90°C
Origin: Italy

Flexible cementitious grout with smooth texture.
Anti-bacterial, resistant to mold and chemicals.
Contains strengthening additive.
Suitable for porcelain, ceramic, and natural stone tiles with joint widths (1–10 mm).
Recommended for bathrooms, terraces, swimming pools, outdoor spaces, and shopping malls.
For indoor and outdoor use.
Available in 15 colors.
Packaging: 2.5 kg
Temperature resistance: -30°C to +90°C
Origin: Italy

Two-component epoxy grout (A + B).
Waterproof, flexible, anti-bacterial, resistant to acids, mold, and both mechanical and chemical stresses.
Suitable for joint widths (1.5–12mm).
For all types of ceramic, porcelain, swimming pool tiles, bathrooms, saunas, medical labs, and kitchens.
For indoor and outdoor use.
Available in 52 colors.
Packaging: 3 kg
Temperature resistance: -20°C to +100°C
Origin: Italy

CemLatex 600 High-performance polymer liquid additive for cementitious mixes.
Improves adhesion, flexibility, and water resistance. Used with adhesives for swimming pools,
underfloor heating and very large tiles; also applied to old concrete to improve bonding with new
concrete and to strengthen plaster behind stone. – Packaging: 1 L, 5 L – Origin: Italy

CemLatex Giunti Polymer liquid additive used instead of water in grouts to increase
bond strength, flexibility, and water resistance. Suitable for swimming pools, large refrigeration
rooms, stairs, bathrooms, terraces, factories, and heating rooms. – Packaging: 1 L, 5 L – Origin: Italy

DUROSTICK – D-22 Protective sealer for marble and granite. Prevents absorption of water and oils
and repels stains such as rust, ink, and coffee. Forms a transparent protective layer that does not
scratch, yellow, or fade, and does not cause slipperiness. Prevents salt efflorescence. Suitable for
vertical and horizontal surfaces, indoors and outdoors, kitchen countertops, and monument
protection. – Packaging/Coverage: 100–150 ml/m² per coat. Durability: ~5 years indoors, ~2 years
outdoors. – Origin: Greece

CemLatex 600 High-performance polymer liquid additive for cementitious mixes.
Improves adhesion, flexibility, and water resistance. Used with adhesives for swimming pools,
underfloor heating and very large tiles; also applied to old concrete to improve bonding with new
concrete and to strengthen plaster behind stone. – Packaging: 1 L, 5 L – Origin: Italy

DUROSTICK – Bio Clean General-purpose cleaner free of ammonia, phosphates, and petroleum.
Removes grease, salts, ink, and tough stains. Suitable for marble, granite, sinks, tiles, and grout. –
Packaging: 750 ml – Coverage: ~12–14 m² per liter – Origin: Greece

BENFER – BenferClean Acidic cleaner for removing grout haze, cement and adhesive residues,
and oils from tiles. Should not be used on marble or stainless steel (must be covered). – Packaging:
1 kg, 5 kg – Coverage: ~500 g/m² – Origin: Italy

DUROSTICK – D-12 Oil-based varnish for impregnating natural and artificial stones and decorative
bricks. UV-resistant and weatherproof. Does not peel or yellow. Provides a wet-look effect while
preserving the natural appearance. Suitable for horizontal and vertical surfaces, indoors and
outdoors. – Packaging: 1 L – Coverage: ~5–8 m² per liter – Origin: Greece

DUROSTICK – D-72 Water-based, odorless stone varnish that provides a permanent wet look and
enhances the natural veins of stone. Does not peel, yellow, or crack, and protects against dirt and
dust. For indoor use only. – Packaging: 750 ml – Coverage: ~8–10 m² per liter – Origin: Greece

Strong and flexible, it withstands high pressure and is designed for insulating swimming pools. A + B (two-component cementitious insulator)

Water collection wells, terraces before tile installation, showers, foundations, and behind stone. It features a white color and does not affect the shape or color of the stone. It is easy to apply and use. It can be applied with a trowel, brush, or roller.

Crack bridging: ≥ 1 mm

Packaging: 20 kg of powder and 5 kg of liquid

Coverage: 8-9 square meters, two sides, 2 mm thick.

Temperature resistant from -30 to +90°C.

Color: White

Origin: Italian

A two-component cementitious insulator (A + B), highly flexible and efficient, resistant to salts and many substances that affect concrete and steel. It is used to insulate wells, swimming pools, roofs, and terraces before installing tiles, as well as to insulate foundations and water tanks. It is applied with a trowel.

Crack bridging: ≥ 1.8 mm

Packaging: 25 kg powder and 8 kg liquid

Coverage: 8–9.5 square meters, 2 mm thick, double-sided

Temperature resistant from -30°C to +90°C

Color: Grey

Origin: Italian

A long-lasting, flexible, fiber-reinforced, acrylic-modified cementitious waterproofing compound. It is resistant to water, negative pressure, and positive pressure. It can withstand pressures up to 7 bar. It treats dampness in interior walls and resists continuous moisture. It is used for waterproofing fountains, swimming pools, roof insulation, and bathrooms. It can be applied with a brush, roller, or trowel.

Crack bridging: ≥ 2 mm.

Packaging: 4 kg, 18 kg.

Coverage: 2–2.6 kg/m²/mm², 7–9 m² per 18 kg bag.

Resists temperatures from -35 to +90 C.

Color: White.

Origin: Greek.

A highly flexible 100% polyurethane rubber insulator for exterior surfaces. It is UV-resistant and has an elongation of up to 800%. It is easy to apply using a brush or roller in two coats, with a 24-hour interval between coats. It can be applied to concrete, plaster, tiles, cement boards, asphalt, glass, and tiles, provided a primer is used. It can also be applied indirectly under tiles. It is available in white

Packaging: 6 kg, 25 kg

Coverage: 16 square meters (per 25 kg)

Temperature resistant from -40 to +90

Origin: Greece

• Do not apply the sealant to wet areas.
• Do not apply the sealant to dirty areas.
• Do not mix the sealant with any other material.
• Do not apply the sealant to loose areas.

Flexible, waterproof acrylic insulator, for insulating exterior walls and surfaces exposed to ultraviolet sunlight. It is used to protect surfaces that have been insulated with cement insulators. Elongation reaches 400%. It seals cracks and prevents their appearance. It maintains its color without calcification and resists corrosive gases. A primer can be made from the same material by diluting it with water for areas containing

a cement surface full of holes.

Packaging: 5 kg

Coverage: 3-5 square meters on both sides

Temperature resistant from -30 to +90

Origin: Greece

Stone insulator is used to insulate natural stone and concrete exterior walls. It is water-based and penetrates the stone. It penetrates the pores and becomes part of the stone’s foundation without altering the stone’s properties and allows it to breathe. It can be applied by brush or spray (preferably by brush).

Capacity: 20 liters

Coverage: 90 square meters depending on surface absorption

Origin: Finland

Notes:

*Do not apply the sealant to damp areas.

*Do not apply the sealant to dirty areas.

A silicone-based grout sealer that protects against stains and moisture absorption, thus preserving the grout’s color. It also covers small cracks. It is used indoors in bathrooms and kitchens to prevent moisture absorption and mold formation, and outdoors to prevent the grout from separating from tiles due to frost and moisture. It does not form a film and does not impede ventilation. It is used on all ceramic, stone, granite, and artificial stone grouts, both indoors and outdoors.

Note: (Apply 20 days after curing.)

Packaging: 500 ml, 1 liter

Coverage: 1 liter covers 25-50 square meters per layer, depending on tile size.

Protection period: 5 years (internal), 2 years (external).

Resistant to temperatures from -30°C to +80°C.

Origin: Greece.

A highly adhesive, waterproof cementitious material for tile edges. It is resistant to adverse weather conditions, shrinkage, shocks, corrosion, and mechanical stress. It is used to prevent water leakage at tile edges, especially where tiles meet stone, concrete, metal, wood, and many other materials. It is also used to seal all tile openings for air conditioners, solar heaters, chimney openings, etc.

Available in brick red.

Packaging: 2.5 kg. Coverage: 1 kg/m²/mm.

Resistant to temperatures from -30°C to +90°C.

Origin: Greece.

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

Ultra powerful adhesive of MS-POLYMER technology.
In many applications it substitutes screws and nails
for numerous materials. It has exceptionally powerful
adhesion on porous and non porous surfaces, even
without primer, on similar and dissimilar materials.
The product has very high tensile strength
(2.65 N/mm2
) and is resistant to moisture.
Can be coated with regular (acrylic and emulsion)
paints, except alkyd-based paints. It does not corrode
metals.

Fireproof sealant and adhesive, for filling joints
exposed to extreme temperatures, up to +1.200°C.
It does not crack in extreme temperature variations, and it firmly adheres to non-porous surfaces, fire (refractory) bricks and natural stone,
concrete as well as cast iron, steel, brass and
copper etc. Easy to work with, both on horizontal
and vertical joints, without sagging. It does not
contain asbestos.

Extremely powerful, rapid action white adhesive.
Adheres strongly in no time to a multitude of
substrates, providing strong and flexible bonding
for building insulation materials and other materials
that require secure fastening.
In most cases its use eliminates the need for nails,
screws, rivets or other fasteners, making assembling
various materials quick, simple and easy.